How-to
QR Codes, Data Carriers and GS1 Digital Link Explained
How a Digital Product Passport connects to a physical product: QR codes, data carriers, unique identifiers and GS1 Digital Link in plain language.
- Reading time
- 7 min read
- Last reviewed
- Last updated
- Written by
- Techavtar editorial team
- Reviewed by
- Awaiting subject review
Short answer
A Digital Product Passport is connected to a physical product by a data carrier, usually a QR code. The code holds a web address that contains a unique product identifier, and scanning it opens the passport. The passport data stays online, so it can be updated without reprinting the label.
Key takeaways
- A data carrier, most often a QR code, is the physical link between a product and its Digital Product Passport.
- The QR code holds a web address with an identifier in it. The passport data stays online, so it can be updated without reprinting.
- Identifiers can work at model, batch or item level. The rules for your product group decide which level you need.
- GS1 Digital Link puts product identifiers into a web address so one QR code can serve retail and online uses.
- From 18 February 2027, all batteries must be marked with a QR code giving access to required information.
Key facts
- A Digital Product Passport is a structured, machine-readable product record covering product identity, material composition, sustainability and circularity data, and compliance evidence, reached through a data carrier such as a QR code. Source: osapiens: DPP rules and who has to comply; European Commission: Digital Product Passport
- From 18 February 2027, all batteries must be marked with a QR code that gives access to the required information (Article 13(6)). Source: Arianee: battery passport timeline; CMS: EU Batteries Regulation legal update
From our regulatory facts register, last reviewed 10 Nov 2026. Information only, not legal advice.
A Digital Product Passport (DPP) is connected to a physical product by a data carrier, usually a QR code. The code holds a web address that contains a unique product identifier, and scanning it opens the passport. GS1 Digital Link is a GS1 standard for putting product identifiers into a web address, so one QR code can serve retail and online uses.
This article explains each part in plain language. For the wider picture, see our guide to what a Digital Product Passport is.
The short answer
Three things connect a product to its passport.
| Part | What it does | Example: an e-bike battery |
|---|---|---|
| Unique product identifier | Says exactly which product, batch or item this is | A code for this model plus a serial number for this battery |
| Data carrier | Puts the identifier on the physical product | A QR code on the battery casing |
| Web address | Takes the scanner from the code to the passport | A link that opens this battery's passport page |
The passport data itself is not inside the QR code. The code only points to it. That is why a passport can be corrected or extended after the product is sold without touching the label. Our step-by-step article on how a Digital Product Passport works follows the full journey from data to scan.
What a data carrier is
A data carrier is the physical link between a product and its passport. A DPP is a structured, machine-readable record reached through a data carrier such as a QR code.
A QR code is a square grid of dark and light modules that stores a short piece of text. For a DPP QR code, that text is a web address. A phone camera reads the grid, recovers the address and opens it in a browser. No app is needed.
QR codes are the common choice because they are cheap to print and every smartphone reads them. Other carriers exist, such as chips read by radio. Which carriers are accepted for your product group is a question for the rules that apply to that group, so check before you invest in tooling.
Batteries have a date fixed in law. From 18 February 2027, all batteries must be marked with a QR code giving access to required information, under Article 13(6) of the EU Batteries Regulation.
Model, batch or item-level identifiers
A unique product identifier is a code that identifies a product and links it to its passport. It can work at three levels.
| Level | What one identifier covers | Example | Trade-off |
|---|---|---|---|
| Model | Every unit of one design | All cotton jackets of one style and colourway | Simple to print; cannot record what happened to one unit |
| Batch | One production run | Jackets cut and sewn in one order | Captures changes between runs; needs batch tracking in production |
| Item | One physical unit | One e-bike battery with its own serial number | Supports repair and ownership history; every label is different |
The level is not only a design choice. It follows from the rules for your product group.
- Batteries. From 18 February 2027, each in-scope battery must have a battery passport. That covers each light means of transport (LMT) battery, each industrial battery above 2 kWh and each electric vehicle battery.
- Other product groups. Under the Ecodesign for Sustainable Products Regulation (ESPR), DPP requirements arrive through a delegated act for each group. Wait for your act to confirm the identifier level.
Identifiers also matter beyond the label. The EU DPP Registry is an index that stores unique identifiers and key data that point to passports. Read more in our explainer on the EU DPP Registry.
The practical lesson: design your numbering so you can move from model to batch or item level later without renumbering everything.
How GS1 Digital Link works
Many products already carry a Global Trade Item Number (GTIN), the GS1 identifier behind most retail barcodes. GS1 Digital Link is a GS1 standard for putting identifiers like that into a web address. The aim is one QR code that serves both retail and online uses, instead of two codes on one label.
The idea works in five steps.
- Start with the identifier. The product has a number, and perhaps a batch or serial number as well.
- Write it into a web address. The identifiers become part of the address, in a fixed order that software can read.
- Encode the address in a QR code. The label now carries both the identifier and a working link.
- Scan. A phone opens the address. Other software can pick the identifier out of the same address.
- Answer by identifier. The web server reads the identifier and returns the right page, such as that product's passport.
An illustration of the principle, for a washing machine:
https://id.example.com/product/WM-4471/item/000451
This is not GS1 syntax. It only shows the idea of an identifier carried inside a web address. The exact structure of a GS1 Digital Link address is defined in GS1's own specification. Read it, or ask GS1, before you print anything.
Whichever structure you use, two design rules hold. Keep the address on a domain you control, so the link survives a change of supplier. And put identifiers in the address, never the passport data itself.
Designing a QR label that lasts
A passport is only useful if the code still scans years later. A jacket is washed, a washing machine sits in a damp room, and an e-bike battery is shaken and rained on. These are practical guidelines, not legal requirements.
- Match the label to the product's life. Use a sewn-in label on a jacket, the rating plate on a washing machine, and an engraved or bonded mark on a battery casing.
- Keep the address short. Short addresses make simpler codes, and simpler codes scan more reliably at small sizes.
- Print with strong contrast. Dark modules on a light, matt background. Avoid glossy or curved surfaces where you can.
- Leave clear space. A QR code needs an empty margin around it to be read.
- Use error correction. QR codes can be generated with built-in redundancy, so a scuffed code still scans.
- Add a readable fallback. Print the identifier in text beside the code.
- Place it where people can reach it. A repairer should not have to dismantle the product to scan it.
- Test on real units. Scan after washing, abrasion and heat, with several phones.
- Keep the link alive. The address must keep working for as long as the product is in use.
Standards to watch
Three sets of rules shape your label. None of them needs to be memorised, but someone on your team should follow them.
| What | Why it matters | Status |
|---|---|---|
| Horizontal DPP standards | The Commission adopted an implementing decision referencing six horizontal DPP standards, on topics including unique identifiers, data carriers and interoperability | Published in May 2026 |
| Your product-group rules | They set the detailed DPP requirements for your products | Batteries: fixed in law. ESPR groups: through delegated acts |
| GS1 specifications | They define the exact structure of a GS1 Digital Link address | Maintained by GS1 |
If you are unsure which rules cover your products, the DPP scope checker gives a first answer. Choosing identifier granularity is also step three of our DPP readiness checklist.
See a sample passport
The quickest way to understand a data carrier is to scan one. See a sample passport on our home page and follow the link from code to record. When you want to test the idea on one of your own products, you can book a demo.
Frequently asked questions
Can we use our existing barcode?
You can usually keep the product number behind it, but not the printed barcode itself. A traditional striped barcode holds only a number, so a phone cannot use it to open a passport. Plan for a QR code that carries a web address containing your identifier, and confirm the accepted formats for your product group.
Does every unit need its own QR?
It depends on the identifier level your product rules require. Where a passport describes a model or a batch, many units can share one code. Where each item needs its own passport, as the EU Batteries Regulation requires for each in-scope battery, each unit needs its own identifier and code.
What if the QR code is damaged?
QR codes include error correction, so a lightly scratched code often still scans. For heavier damage, print the identifier in readable text next to the code so a person can type it in. Choose a label material and position that match the product's working life.