Skip to content
DigitalProductPassport

Regulations

DPP Timeline: Which Products Need a Passport and When

A Digital Product Passport timeline you can plan from: what's fixed in law, what's expected, and what it means for batteries, textiles and more.

Reading time
7 min read
Last reviewed
Last updated
Written by
Techavtar editorial team
Reviewed by
Awaiting subject review

Short answer

There is no single DPP deadline. The first date fixed in law is 18 February 2027, when certain batteries need a battery passport. For other products, a DPP becomes mandatory only after the European Commission adopts a delegated act for that product group, followed by at least 18 months of transition.

Key takeaways

  • There is no single DPP deadline. Each product group gets its own date.
  • The first date fixed in law is 18 February 2027, when LMT, electric vehicle and industrial batteries above 2 kWh need a battery passport.
  • Textiles (apparel), aluminium and tyres are planned for delegated-act adoption in Q3 to Q4 2027. These dates are indicative.
  • After a delegated act is adopted, companies get at least 18 months before it applies, except in duly justified cases.
  • As of mid-September 2026, no product-group delegated act under ESPR had been adopted.

Key facts

From our regulatory facts register, last reviewed 10 Nov 2026. Information only, not legal advice.

The digital product passport timeline has no single deadline. The first date fixed in law is 18 February 2027, when certain batteries need a battery passport. For other products, a Digital Product Passport (DPP) becomes mandatory only after the European Commission adopts a delegated act for that product group, followed by at least 18 months of transition.

Last reviewed: 12 November 2026. Dates marked "Indicative" are plans and can change.

The short answer

Two laws drive the dates. The Batteries Regulation sets a fixed date for battery passports. The Ecodesign for Sustainable Products Regulation (ESPR) covers other product groups, and it sets a process instead of a date.

If you make or sellYour dateStatus
LMT, electric vehicle or industrial batteries above 2 kWh18 February 2027Fixed in law
Textiles (apparel), aluminium or tyresDelegated act expected in Q3 to Q4 2027, applying at least 18 months after adoptionIndicative
Other productsNo date we can confirm todayNot yet known

So the honest answer to "when is DPP mandatory?" is that it depends on your product group. If DPPs are new to you, our guide to what a Digital Product Passport is covers the basics first.

Dates fixed in law

These dates are written into EU law or have already happened. You can plan around them.

DateWhat happensSource
17 August 2023The Batteries Regulation, Regulation (EU) 2023/1542, enters into forceEuropean Commission batteries page
18 February 2024The Batteries Regulation starts to applyEuropean Commission batteries page
18 July 2024ESPR, Regulation (EU) 2024/1781, enters into force and creates the legal basis for DPPsEUR-Lex
20 July 2026The Commission launches the EU DPP Registry and a testing environmentEuropean Commission DPP page
18 February 2027Each LMT battery, industrial battery above 2 kWh and electric vehicle battery placed on the EU market or put into service must have a battery passport (Article 77(1))European Commission batteries page
18 February 2027All batteries must be marked with a QR code giving access to required information (Article 13(6))CMS legal update
18 August 2027Battery due diligence obligations apply, after a two-year postponement by Regulation (EU) 2025/1561Bertling summary

Two details matter for batteries. First, the passport duty covers three categories only: LMT (light means of transport) batteries such as an e-bike battery, industrial batteries with a capacity above 2 kWh, and electric vehicle batteries. Second, batteries placed on the market before 18 February 2027 do not need a passport (B.D. Emerson battery passport guide).

Our guide to EU battery passport requirements explains the scope, the data and a preparation plan.

Expected dates (indicative)

For products under ESPR, no date is fixed yet. As of mid-September 2026, no product-group delegated act under ESPR had been adopted (B.D. Emerson, September 2026). We re-check this point before every update of this page.

What exists today is a plan:

  • The Commission's DPP page lists textiles (apparel), aluminium and tyres for indicative adoption in Q3 to Q4 2027 (European Commission DPP page).
  • For textiles, the Commission's 2025 to 2030 working plan lists apparel for delegated-act adoption in 2027. No DPP is required for textiles yet (B.D. Emerson textiles guide).

"Adoption" is not the same as "application". Adoption is the day the Commission adopts the act. Application is the later day when companies must comply. The gap between them is the transition period.

Brands that sell clothing can read more in our guide to Digital Product Passports for textiles and apparel.

How the 18-month transition works

ESPR does not set one DPP start date. DPP requirements reach each product group through a Commission delegated act for that group. After the act is adopted, companies get a transition period of at least 18 months before it applies, except in duly justified cases (European Commission DPP page).

In practice, the sequence for a product group is:

  1. The Commission adopts the delegated act for the group.
  2. A transition period of at least 18 months runs.
  3. The act applies, and products in the group need a DPP.
  4. Registration in the EU DPP Registry becomes mandatory as the group's DPP obligation takes effect (iPoint on the Registry launch).

Here is a worked example. It is our own arithmetic, not a date in law. Suppose the act for apparel is adopted in the fourth quarter of 2027, as currently planned. Adding 18 months gives the second quarter of 2029 as the earliest point at which it could apply. If adoption slips, or the act gives a longer transition, the date moves later. If the Commission relies on the "duly justified cases" exception, it could be shorter.

The practical point is that 18 months is the minimum notice, and the act itself will state the real date. Our ESPR explainer describes how delegated acts work in more detail.

Digital product passport timeline by product group

This table brings both laws together. "Fixed" means the date is set in law. "Indicative" means the date is planned or expected and can change.

Product groupRequirementDateStatus
LMT batteries (for example, an e-bike battery)Battery passport18 February 2027Fixed
Industrial batteries above 2 kWhBattery passport18 February 2027Fixed
Electric vehicle batteriesBattery passport18 February 2027Fixed
All batteriesQR code giving access to required information18 February 2027Fixed
Batteries (due diligence)Due diligence obligations18 August 2027Fixed
Textiles (apparel)Delegated act adoptionQ3 to Q4 2027 (expected)Indicative
Textiles (apparel)DPP appliesAt least 18 months after adoptionIndicative
AluminiumDelegated act adoptionQ3 to Q4 2027 (expected)Indicative
AluminiumDPP appliesAt least 18 months after adoptionIndicative
TyresDelegated act adoptionQ3 to Q4 2027 (expected)Indicative
TyresDPP appliesAt least 18 months after adoptionIndicative
Other product groups, including steelNot confirmedNo date we can confirmNot yet known

A note on the last row. You may see dates for steel and other product groups in industry timelines. We have not yet confirmed those dates against a primary source, so we do not publish them. This page will be updated when we can.

Sources for the table: European Commission batteries page, Arianee battery passport timeline and the European Commission DPP page.

How to plan backwards from your deadline

A deadline is only useful if you work back from it. The durations below are planning suggestions, not legal requirements. Adjust them to the size of your product range.

  1. Write down your date and its status. Use the tables above. If the date is indicative, plan against the earliest realistic date and review it every quarter.
  2. Reserve the last three months for a pilot and fixes. Publish passports for one product line first. For an e-bike battery maker, that could be one battery model.
  3. Allow three to six months for supplier data. Material composition and evidence usually sit with suppliers, and requests take several rounds.
  4. Allow one to two months to map your own data. Find where product identity, materials and compliance evidence are kept today: ERP, PLM, supplier files and spreadsheets.
  5. Decide labelling early. Check where the QR code will go on the product and how it survives use. Label and packaging changes often have long lead times of their own.
  6. Name an owner and a review date. One person tracks the legal status of your product group and updates the plan when it changes.

Added together, these suggestions come to roughly seven to eleven months for a first product line, from the first data request to a published passport. If your date is fixed, compare that with the time you have left. If your date is indicative, you can use the extra time to start with a small pilot.

Confirm your obligations with your legal advisor before you commit to a compliance date.

To check your product's deadline, use the DPP scope checker. It shows which rules cover your product group and whether its date is fixed or indicative. If you want help building the plan, you can request a demo.

Frequently asked questions

Is there one DPP deadline?

No. ESPR does not set one start date for Digital Product Passports. Requirements reach each product group through a Commission delegated act for that group, followed by a transition period of at least 18 months. Batteries are covered by a separate regulation with its own fixed date, 18 February 2027.

When will textiles need a DPP?

No DPP is required for textiles yet. The Commission's 2025 to 2030 working plan lists textiles (apparel) for delegated-act adoption in 2027, and any act would apply at least 18 months after it enters into force. Both points are planned, not fixed, so treat the date as expected until the act is adopted.

What is the battery passport deadline?

From 18 February 2027, each LMT battery, each industrial battery with a capacity above 2 kWh and each electric vehicle battery placed on the EU market or put into service must have a battery passport. Batteries placed on the market before that date do not need one. From the same date, all batteries must carry a QR code.

Find out how ready you are

The readiness quiz takes a few minutes and shows where your product data stands. When you want to see a passport built from your own products, book a demo.

Information only, not legal advice.