Skip to content
DigitalProductPassport

Industries

EU Battery Passport: What You Need Before 18 February 2027

From 18 February 2027, EV, LMT and industrial batteries over 2 kWh need a battery passport. Learn the scope, data, access tiers and steps to prepare.

Reading time
10 min read
Last reviewed
Last updated
Written by
Techavtar editorial team
Reviewed by
Awaiting subject review

Short answer

From 18 February 2027, a battery passport is required for each LMT battery, each industrial battery with a capacity above 2 kWh and each electric vehicle battery placed on the EU market or put into service. The rule comes from the EU Batteries Regulation, Regulation (EU) 2023/1542. From the same date, all batteries must carry a QR code.

Key takeaways

  • From 18 February 2027, each LMT battery, industrial battery above 2 kWh and electric vehicle battery placed on the EU market or put into service must have a battery passport.
  • From the same date, all batteries must carry a QR code giving access to required information.
  • Batteries placed on the market before 18 February 2027 do not need a passport.
  • Passport data is split into three access tiers: public, persons with a legitimate interest, and authorities.
  • Battery due diligence obligations apply from 18 August 2027.

Key facts

From our regulatory facts register, last reviewed 10 Nov 2026. Information only, not legal advice.

From 18 February 2027, a battery passport is required for each LMT battery, each industrial battery with a capacity above 2 kWh and each electric vehicle battery placed on the EU market or put into service. The rule comes from the EU Batteries Regulation, Regulation (EU) 2023/1542. From the same date, all batteries must carry a QR code.

The short answer

The EU battery passport is a digital record that travels with a battery. Its start date is fixed in law. That sets it apart from passports under the Ecodesign for Sustainable Products Regulation (ESPR), where no product-group act had been adopted as of mid-September 2026 (B.D. Emerson, September 2026). If Digital Product Passports (DPPs) are new to you, our guide to what a Digital Product Passport is explains the idea behind them.

QuestionAnswerSource
Which law?The Batteries Regulation, Regulation (EU) 2023/1542European Commission batteries page
Which batteries?LMT, industrial above 2 kWh and electric vehicle batteriesEuropean Commission batteries page
From when?18 February 2027European Commission batteries page
What about older batteries?Batteries placed on the market before that date do not need a passportB.D. Emerson battery passport guide
Who can see the data?Three access tiers: public, persons with a legitimate interest, and authoritiesB.D. Emerson battery passport guide

The Batteries Regulation entered into force on 17 August 2023 and has applied since 18 February 2024. The passport is one of its later milestones.

Which batteries need a passport

Article 77(1) of the regulation names three categories. From 18 February 2027, each of these needs a passport when it is placed on the EU market or put into service (European Commission batteries page):

CategoryExamplePassport needed?
LMT (light means of transport) batteryAn e-bike batteryYes
Industrial battery with a capacity above 2 kWhDepends on your product; check the definition in the regulationYes, if above 2 kWh
Electric vehicle batteryThe battery that powers an electric vehicleYes

Three points about scope are worth noting.

The passport is per battery. The rule says "each" battery. So plan for a record for every in-scope e-bike battery you ship, not one record for the model.

The capacity threshold applies to industrial batteries. In the wording of the rule, the 2 kWh figure is attached to industrial batteries. It is not attached to LMT or electric vehicle batteries.

The trigger is the EU market. The duty arises when a battery is placed on the EU market or put into service. Batteries placed on the market before 18 February 2027 do not need a passport (B.D. Emerson battery passport guide).

The category definitions sit in the regulation itself. If you are unsure whether your product counts as an LMT battery or an industrial battery, confirm the classification with your legal advisor before you plan around it.

Key dates (passport, QR code, due diligence)

The battery passport is one of three dates to track in 2027.

DateWhat appliesWhich batteriesSource
17 August 2023Batteries Regulation enters into forceAllBertling summary
18 February 2024Batteries Regulation starts to applyAllBertling summary
18 February 2027Battery passport required (Article 77(1))LMT, industrial above 2 kWh, electric vehicleEuropean Commission batteries page
18 February 2027QR code giving access to required information (Article 13(6))All batteriesCMS legal update
18 August 2027Due diligence obligations applySee the regulationArianee battery passport timeline

All of these dates are fixed in law. None of them is indicative.

The due diligence date moved. It now stands at 18 August 2027, after a two-year postponement by Regulation (EU) 2025/1561 (Bertling summary). The passport and QR code dates are separate from it.

Note the difference in scope between the passport and the QR code. The passport covers three battery categories. The QR code rule covers all batteries. A company that sells only small batteries may have no passport duty and still need to change its labels.

For labelling teams, the QR code date is often the one to plan first. Artwork, tooling and label stock have lead times of their own, and a code has to be tested on the real surface of the battery. Decide early where the code goes and how it is applied.

To see how these dates sit beside the dates for textiles and other products, read our DPP timeline by product group.

What data the battery passport holds

The data that a battery passport must hold is set by the regulation itself. We do not reproduce the list of data points here, because we have not yet checked it line by line against the primary text. Treat the regulation, including Annex XIII, as your checklist.

As a planning guide, DPPs in general cover four kinds of information (European Commission DPP page):

  • product identity
  • material composition
  • sustainability and circularity data
  • compliance evidence

The harder question for most teams is where that data sits today. For an e-bike battery, it is usually spread across several places.

Kind of informationWhere it often sits todayWho usually holds it
Product identityERP, production records, serial number listsYour operations team
Material compositionBill of materials, supplier data sheetsEngineering and your cell or pack suppliers
Sustainability and circularity dataSupplier declarations, internal studiesSustainability team and suppliers
Compliance evidenceTest reports, certificates, declarationsQuality or compliance team

This table describes typical company systems. It is not a list of legal requirements.

Two habits make the later work easier. First, store each value as a structured field with a unit, not as a line in a PDF. Second, keep the evidence for a value next to the value, with its issue date. Our article on what data goes into a Digital Product Passport goes through each kind of data in more detail.

Who can see which data

A digital battery passport is not fully public. Battery passport data is split into three access tiers under Annex XIII (B.D. Emerson battery passport guide).

Access tierWho it serves
PublicThe general public
Persons with a legitimate interestParties the regulation recognises as having a legitimate interest
AuthoritiesAuthorities named in the regulation

The regulation decides which data point belongs to which tier, and who counts as a person with a legitimate interest. We do not map individual data points to tiers here, because we have not yet confirmed that mapping.

What you can do now is build for tiers from the start:

  • Tag every field with a tier. Decide the tier when you define the field, not when you publish.
  • Keep one record with several views. Avoid separate copies of the passport for each audience, because they drift apart.
  • Control restricted access. Requests for non-public data need a login or another form of checked access, and a log of who saw what.
  • Show what is locked. A reader should be able to tell that more data exists, even when they cannot open it.

Tiering also answers a common worry. Having a passport does not mean that every data point is open to everyone.

Registering in the EU DPP Registry

The European Commission launched the EU DPP Registry and a testing environment on 20 July 2026 (European Commission DPP page).

The Registry is an index. It stores unique identifiers and key data that point to passports. The passport data itself is held by the economic operator or its DPP service provider (BPMA guidance). Registration becomes mandatory as each product group's DPP obligation takes effect (iPoint on the Registry launch).

We have not yet confirmed the exact wording of the registration step for batteries, including when in the process it must happen. Confirm that with your legal advisor. Until then, plan on the cautious assumption that registration is part of getting a battery ready for the market, not a task for afterwards.

The split between index and passport matters for batteries, because a per-battery passport means a large number of records. The detailed data stays in your own system or your provider's. Only identifiers and key data go to the Registry.

In practical terms, that means three things:

  1. Each in-scope battery needs a unique identifier before it leaves the factory.
  2. The passport behind that identifier must be hosted and online.
  3. Someone must own the Registry entry and keep it in step with the passport.

Our explainer on the EU DPP Registry and how registration works covers what the Registry stores and how to choose between hosting passports yourself and using a provider.

A 90-day preparation plan

This plan is a suggestion for a first product line, such as one e-bike battery model. The timings are ours, not the regulation's. Larger ranges need longer.

Days 1 to 30: scope and data

  1. Confirm scope. List every battery you place on the EU market and sort it into LMT, industrial above 2 kWh, electric vehicle or other. The DPP scope checker gives a first view.
  2. Name an owner. One person is accountable for the passport programme and has time to run it.
  3. Read the passport rules with your team. Go through the regulation's passport provisions, including Annex XIII, and turn them into a field list with an owner and a source for each field.
  4. Find the gaps. Mark each field as available, available but unstructured, or missing.
  5. Write to suppliers. Send your cell and pack suppliers a specific data request with a due date.

Days 31 to 60: build and collect

  1. Decide your identifier. Choose how each battery will be uniquely identified and where that identifier is created in production.
  2. Choose hosting. Decide whether you host passports yourself or use a DPP service provider.
  3. Load the data. Enter the available fields for your pilot model and attach evidence to each one.
  4. Set the access tiers. Tag each field as public, legitimate interest or authorities.
  5. Design the label. Fix the QR code's position and size, and how it will be applied so that it stays readable for the battery's life.

Days 61 to 90: pilot and check

  1. Publish a pilot passport. Create passports for a small production batch.
  2. Test the scan. Scan the code on real units with several phones and check that each one opens the right record.
  3. Test the tiers. Confirm that a public visitor sees only public data.
  4. Rehearse an update. Change one value and check that the passport and its history both show the change.
  5. Review with your legal advisor. Walk through the pilot against the regulation before you scale.

After day 90, extend the same steps to your other battery models, one line at a time.

Confirm your obligations with your legal advisor. This article is information, not legal advice.

If you want to see where your battery passport readiness stands, book a demo. We will walk through a sample battery passport and the data behind it using one of your own models.

Frequently asked questions

Do portable batteries need a passport?

The passport duty in Article 77(1) names three categories: LMT batteries, industrial batteries with a capacity above 2 kWh and electric vehicle batteries. Portable batteries are not on that list. They are still covered by the QR code rule, which applies to all batteries from 18 February 2027. Confirm how your battery is classified with your legal advisor.

Do batteries already on the market need one?

No. Batteries placed on the market before 18 February 2027 do not need a passport. The duty applies to in-scope batteries placed on the EU market or put into service from that date.

Who is responsible for the passport?

The duty is tied to the battery being placed on the EU market or put into service. Our sources do not yet confirm which business in the chain carries the legal duty in each case, so we do not state it here. Confirm it with your legal advisor, and agree in writing with your suppliers and customers who provides which data.

What does the QR code have to link to?

Under Article 13(6), the QR code must give access to the required information about the battery. We have not itemised that information here because we have not yet confirmed the full list. In practice, plan for one code that leads to one stable web address for each battery.

Find out how ready you are

The readiness quiz takes a few minutes and shows where your product data stands. When you want to see a passport built from your own products, book a demo.

Information only, not legal advice.