Skip to content
DigitalProductPassport

Regulations

ESPR Explained: What the EU Ecodesign Regulation Means for Your Products

The ESPR regulation, (EU) 2024/1781, is the EU law behind Digital Product Passports. What it covers, how delegated acts work and what to do now.

Reading time
9 min read
Last reviewed
Last updated
Written by
Techavtar editorial team
Reviewed by
Awaiting subject review

Short answer

The ESPR regulation is the EU's Ecodesign for Sustainable Products Regulation, Regulation (EU) 2024/1781. It entered into force on 18 July 2024 and created the legal basis for Digital Product Passports. It does not set one deadline for everyone: the detailed rules arrive one product group at a time, through delegated acts.

Key takeaways

  • ESPR is Regulation (EU) 2024/1781. It entered into force on 18 July 2024 and created the legal basis for Digital Product Passports.
  • ESPR sets no single start date. Requirements reach each product group through its own delegated act.
  • After a delegated act is adopted, companies get at least 18 months before it applies, except in duly justified cases.
  • As of mid-September 2026, no product-group delegated act had been adopted. Textiles (apparel), aluminium and tyres are planned for adoption in Q3 to Q4 2027.
  • You can prepare now by mapping products, collecting material data and organising evidence.

Key facts

From our regulatory facts register, last reviewed 10 Nov 2026. Information only, not legal advice.

The ESPR regulation is the EU's Ecodesign for Sustainable Products Regulation, Regulation (EU) 2024/1781. It entered into force on 18 July 2024 and created the legal basis for Digital Product Passports (DPPs), as the regulation text on EUR-Lex shows. It does not set one deadline for everyone. The detailed rules arrive one product group at a time, through delegated acts.

The ESPR regulation in one paragraph

The Ecodesign for Sustainable Products Regulation (ESPR) is a framework law. It lets the European Commission set product rules group by group, instead of writing every rule into one text. Its official number is Regulation (EU) 2024/1781, which is why you will also see it written as "ESPR 2024/1781". It has been in force since 18 July 2024, and it is the law that created the legal basis for the DPP (European Commission DPP page).

For most companies, the DPP is the part of ESPR that changes daily work. If the idea is new to you, start with our complete guide to the Digital Product Passport and come back here for the legal background.

One point of language helps. There is no separate "DPP regulation". The passport is a tool created by ESPR and switched on by product-specific acts. Batteries are a special case: their passport comes from a different law, the Batteries Regulation, Regulation (EU) 2023/1542 (European Commission batteries page).

What ESPR covers

ESPR has three parts that matter to a manufacturer or brand: ecodesign requirements, the DPP and a ban on destroying certain unsold goods.

Ecodesign requirements

The regulation's name describes its first part: ecodesign requirements for sustainable products. ESPR itself is the framework. The rules for a specific product group are written into the act for that group, so the requirements for a cotton jacket can differ from those for a washing machine.

We do not list individual requirement types here, because we only publish points we have checked against a primary source. The full text is on EUR-Lex.

Digital Product Passports

A DPP is a structured, machine-readable product record. According to the European Commission DPP page, it covers four kinds of information:

  • product identity
  • material composition
  • sustainability and circularity data
  • compliance evidence

People and systems reach the passport through a data carrier such as a QR code on the product, its label or its packaging. Scan the code on a jacket and you reach that jacket's record.

ESPR creates the passport as a legal tool. It does not, on its own, require one for any product today. That step needs a delegated act, which the next section explains.

The ban on destroying unsold goods

ESPR also bans the destruction of unsold apparel and footwear for in-scope companies. In February 2026 the Commission adopted two supporting acts: a delegated act listing the allowed exceptions, and an implementing act for reporting. Small and micro enterprises are exempt (Carbonfact's summary of ESPR for textiles).

We do not give start dates for the ban here, because we have not yet confirmed them against the regulation text. If you sell clothing or shoes, our guide to Digital Product Passports for textiles and apparel covers what brands should prepare.

How delegated acts work

A delegated act is a legal act adopted by the European Commission that adds detailed rules to a regulation. Under ESPR, this is how requirements reach your products. The Commission states that ESPR does not set one DPP start date. DPP requirements reach each product group through a delegated act for that group (European Commission DPP page).

The path for a product group looks like this:

  1. Preparation. Technical work comes before the act. For example, in May 2026 the EU Joint Research Centre (JRC) published a study proposing DPP content for textile apparel, to prepare the future delegated act (SGS summary of the JRC study).
  2. Adoption. The Commission adopts the delegated act for the product group. As of mid-September 2026, no product-group delegated act under ESPR had been adopted (B.D. Emerson, September 2026).
  3. Transition. After adoption, companies get a transition period of at least 18 months before the act applies, except in duly justified cases (European Commission DPP page).
  4. Application. From the application date, the requirements in the act apply to that product group. Registration in the EU DPP Registry becomes mandatory as each product group's DPP obligation takes effect (iPoint on the Registry launch).

What should you do while your product group waits at the first step? Follow the preparation work, because studies such as the JRC's show the direction of the data that may be asked for. Do not treat a proposal as final, though. Its content can change before the act is adopted.

This split between the framework and the acts explains most of the confusion about dates.

QuestionWhere the answer sitsStatus today
Is there a legal basis for DPPs?ESPR, Regulation (EU) 2024/1781Fixed: in force since 18 July 2024
Is there one start date for all products?ESPRFixed: no, each product group has its own
How much notice do companies get?ESPRFixed: at least 18 months after adoption, except in duly justified cases
Do my products need a DPP, and from when?The delegated act for your product groupOpen until that act is adopted

The ESPR delegated acts are the documents to watch. Until the act for your product group is adopted, treat any date you read for that group as a plan and not as law.

Which product groups come first

The Commission's DPP page lists three product groups for indicative adoption in Q3 to Q4 2027: textiles (apparel), aluminium and tyres (European Commission DPP page). These are planned dates and they can move.

Product groupWhat is plannedStatus
Textiles (apparel)Delegated act adoption expected in Q3 to Q4 2027Indicative
AluminiumDelegated act adoption expected in Q3 to Q4 2027Indicative
TyresDelegated act adoption expected in Q3 to Q4 2027Indicative

For textiles, the position today is clear. No DPP is required yet. The Commission's 2025 to 2030 working plan lists textiles (apparel) for delegated-act adoption in 2027, and any act would apply at least 18 months after it enters into force (B.D. Emerson textiles guide).

You may see other product groups named in industry timelines. We only publish dates that we have checked against our sources, so they are not listed here.

Batteries follow a separate track. Their passport comes from the Batteries Regulation and has a date fixed in law: 18 February 2027 for LMT batteries, industrial batteries with a capacity above 2 kWh and electric vehicle batteries (European Commission batteries page).

For every date in one place, with fixed and expected dates kept apart, see the DPP timeline by product group.

What it means for manufacturers outside the EU

If you make products outside the EU and they are sold there, ESPR still matters to you, for a practical reason. A passport needs data that only the maker and its suppliers hold.

Take a cotton jacket sewn in Tiruppur and sold by a brand in Germany. The passport record covers the jacket's identity, its material composition, sustainability and circularity data, and compliance evidence. The brand cannot produce most of that alone. The fibre content, the mills and the test reports sit with the factory and the suppliers behind it.

Expect three things from EU customers as their product groups move towards a delegated act:

  • Data requests in a fixed format. Buyers will want material and component data as structured fields, not as scanned documents.
  • Evidence with each claim. A recycled-content figure or a test result needs a certificate or report behind it.
  • Stable product identifiers. Each model, batch or item needs an identifier that stays the same across your systems and theirs.

Who carries the legal duty for a passport, the non-EU manufacturer or the EU importer, is a legal question that this article does not answer. Confirm your obligations with your legal advisor, and agree the split of tasks with your EU customers in writing.

Manufacturers in India can read our guide to Digital Product Passports for Indian exporters, which looks at EU market access in more detail.

What to do now

You do not need a final delegated act to start. The four kinds of DPP information are already known, and most of the work is finding that data inside your own business. The steps below apply whether your date is fixed, indicative or still unknown.

  1. List your products by group. Note which ones fall into batteries, textiles (apparel), aluminium or tyres. The DPP scope checker gives a first view.
  2. Name an owner. One person should follow the delegated act for each of your product groups and report changes.
  3. Find your data. For one product, write down where its identity, material composition, sustainability data and compliance evidence are kept today. Expect a mix of ERP records, supplier files and spreadsheets.
  4. Ask suppliers early. Supplier data takes the longest to collect. Start with your largest suppliers and one product line.
  5. Organise evidence. Store certificates and test reports with the product they support, with issue and expiry dates.
  6. Pilot one product. Build a passport record for a single product, such as one jacket style or one washing machine model. The gaps you find will shape your plan.
  7. Review the dates every quarter. Indicative dates change. Check the Commission's page, or our timeline, on a fixed schedule.

Use the transition period as a buffer, not as the project plan. Eighteen months passes quickly when the data sits with suppliers in several countries.

To see where your company stands today, take the DPP readiness quiz. It takes a few minutes and shows which areas need work first. If you would like to talk through your product range, you can also request a demo.

Frequently asked questions

When did ESPR enter into force?

ESPR, Regulation (EU) 2024/1781, entered into force on 18 July 2024. That date created the legal basis for Digital Product Passports, but it did not start passport obligations for any product. Those arrive through a delegated act for each product group, followed by a transition period of at least 18 months.

Does ESPR replace the old Ecodesign Directive?

ESPR is a new regulation, numbered (EU) 2024/1781, and it has been in force since 18 July 2024. How it relates to earlier EU ecodesign law is a legal point we have not yet confirmed against the primary text, so we do not state it here. Read the regulation on EUR-Lex or ask your legal advisor if your products are covered by existing ecodesign rules.

Do SMEs get exemptions?

One exemption is confirmed in our sources: small and micro enterprises are exempt from the ban on destroying unsold apparel and footwear. For Digital Product Passports, the rules for each product group will be set in that group's delegated act, so check the act for your products when it is adopted. Confirm your obligations with your legal advisor.

Find out how ready you are

The readiness quiz takes a few minutes and shows where your product data stands. When you want to see a passport built from your own products, book a demo.

Information only, not legal advice.